Floodbox Pro 300
JP50586| Mechanical data | |
|---|---|
| Pump | Vertical single-stage |
| Free passage | 10 mm |
| Bearing | Ball bearings, grease-lubricated |
| Seal on motor side | Mechanical seal |
| Oil chamber | Yes |
| Seal on medium side | SiC mechanical seal |
| Run dry protection | Yes |
| Shaft | Stainless steel |
| Impeller | Stainless steel |
| Motor housing | Stainless steel |
| Submersible | Yes |
| Pressure outlet | C-coupling |
| Weight | 29 kg |
| Electrical data | |
|---|---|
| Ciruit | With built-in level control |
| Voltage | 1/N/PE~230 V |
| Motor rating P1 | 1.83 kW |
| Motor rating P2 | 1.36 kW |
| Current | 2.3 A |
| Power line | 10m H07RN8-F |
| Wires | 3G1,0 |
| Type of enclosure | IP 68 |
| Insulation class | F |
| Winding thermostat | Yes |
| Motor protection | Integrated |
| Plug | Safety |
| Performance | |||||||
|---|---|---|---|---|---|---|---|
| Delivery head H [m] | 1 | 2 | 3 | 5 | 7 | 9 | 13 |
| Flow rate Q [m³/h] | 28 | 25 | 23 | 19 | 14.5 | 10 | 20 |
Specifications can be changed without notice. Performance subject to ISO 9906 tolerances.
The minimum flow velocity in the pressure piping must be 0.7 m/s according to EN 12056.
This data is represented in the performance curve as a limit of application.
Dimensions Flutbox Pro 300(mm)
