HIGHLOGO 1-00 E
JP47987Mechanical data | |
---|---|
Type | Single units without level control |
HxWxL[mm] | 275 x 250 x 155 |
Weight | 4 kg |
Extension for accessory | optinoal |
Main switch | optinoal |
Electrical data | |
---|---|
Voltage | 1/N/PE~230 V |
Type of enclosure | IP 44 |
Alarm buzzer | Yes |
Connection 9V battery | Yes |
Connection thermal contact | Yes |
Connection dry run protection | Yes |
Display operation hours/switching cycles | Yes |
Display amps | Yes |
Automatic alternate operation | No |
Automatic test run | Yes |
Digital signal contact | optinoal |
Input AUX | Yes |
Switch off delay after power outage | Yes |
Event puffer | Yes |
Integrated GSM-Modem | optinoal |
Run time monitoring | Yes |
Max. switching power | 4 kW 1x230V |
Motor protection typ | Overload rely |
Stop time for pump operation | Yes |
Peak load operation | No |
Start | direct |
Fault contact 230 V | Yes |
Fault contact pot. Free | 2 changeover contacts, 5A |
Mechanical accessory | ||||||
---|---|---|---|---|---|---|
Code No. | ||||||
Retaining plate | ||||||
for air bells (in sumps from Ø 1 m) | JP50213 |
Electrical accessory | ||||||
---|---|---|---|---|---|---|
Code No. | ||||||
Rechargeable battery | ||||||
9 V, for mains independent alarm | JP44850 | |||||
Level control | ||||||
Subm. switch pack A | 2 Tauchschalter 9,5 m und Leitungshalter | JP16718 | ||||
Subm. switch pack AmG | 2 subm. ball contact switch with 9.5 m and counterweight | JP16719 | ||||
Subm. switch pack CmG | 1 subm. ball contact switch with counterweight | JP16739 | ||||
Auxiliary switch unit ExH-A | for ex-proof pumps only (single-units) | JP16720 | ||||
Submersible probe (10 m) | for analogue water level indicator (4-20 mA) | JP44808 | ||||
Weight | to stabilize the subm. ball contact switch | JP44803 | ||||
Smart Home | ||||||
FTJP radio transmitter | JP47209 | |||||
Pre-mounted level control | ||||||
Pressure sensor set (10 m) | for analogue water level display with tube set | JP26187 | ||||
Pressure switch | with pressure sensor and tube set | JP26196 | ||||
Pre-mounted accessory | ||||||
Main switch | 15 kW, factory fitted only | JP48002 | ||||
Modem GSM for HighLogo | factory fitted, incl. flat antenna | JP49356 | ||||
Parametrization GSM modul | pre-setting for customer demand | JP55202 | ||||
GSM battery fpr HighLogo 1 | 12V, for single unit, factory fitted | JP25884 | ||||
Retrofittable accessory | ||||||
Staudrucksensor-Modul SDS | for analogue level detection | JP50818 | ||||
Modem GSM for HighLogo | retrofit unit incl. GSM antenna | JP50444 | ||||
Battery 12V with housing | retrofit unit for independent modem operation | JP50635 |